Removing M Series & Vixen S4 Differentials

You can remove and replace the Tr6 differential through the side of the chassis.
  1. Unbolt the half shafts etc.
  2. Tie a cord from the frame to the lower A-arm so the arm does not drop down too far and damage the brake hose.
  3. Unbolt the inner upper A-arm and allow the suspension to unfold down out of the way.
  4. You can then rotate the differential until you find the orientation that allows it to pass out between the frame tubes.
  5. The Jag diff is too large to do this. If you cut off some of the unused mounting bosses, it may be possible.


Last updated on February 13, 2006.